Skip to content
Free delivery over $4930-day returns
0

Sliding magnetic clasp

The Halo Milanese loop for Galaxy Watch4, 5, 6, 7 and FE

$26.95

Woven from fine stainless steel mesh, this supple Milanese loop closes with a flat magnetic clasp that slides anywhere along the band and has quick-release spring bars built into the metal end pieces.

ColorBlack

Expected delivery Sat, Nov 7 to Thu, Nov 12

  • Free shipping over $49
  • 30-day returns
Shipping and returns

Free shipping over $49. Arrives in 9-14 days. Shipping times and costs per country

Not what you were looking for? Return it within 30 days of delivery. How returns work

Specifications

Material
Fine stainless steel mesh with metal end pieces
Works with
Galaxy Watch4, Watch5, Watch6, Watch7 and FE, plus the 42 mm Watch4 Classic and the Watch6 Classic
Fit
End pieces made per model and case size, with 20 mm quick-release spring bars
Clasp
Magnetic, slides to any point along the mesh
Colors
Black, Silver, Pink Gold
Care
Rinse in fresh water, pat dry, keep the magnet away from cards

Fine steel mesh, closed by a magnet

The Halo is a Milanese loop for Samsung Galaxy Watch, woven from fine stainless steel mesh. It closes with a flat magnetic clasp instead of a buckle: you slide the clasp along the mesh and press it down wherever the fit feels right. Because the clasp can stop at any point, you never have to choose between a hole that pinches and one that lets the watch slide around. The mesh is thin and supple, so it lies flat and follows the curve of your wrist. It is a metal band that looks just as right with a suit as with a T-shirt.

Each end of the band has a metal end piece in the same finish as the mesh, with a quick-release spring bar built in. The end pieces are shaped for each Galaxy Watch model and case size, so the band sits close against the case. That is why you choose your watch here, not a band width.

The three colors:

  • Black: black mesh with a black clasp and end pieces.
  • Silver: bright steel, a close match for a silver case.
  • Pink Gold: a soft rose tone that suits a pink gold or gold case.

In every color, the clasp and the end pieces match the mesh.

Which Galaxy Watch it fits

The Halo fits the Galaxy Watch models that take 20 mm quick-release bands. In the Fit option, pick your model and case size:

  • Galaxy Watch4: 40 or 44 mm, plus the 42 mm Watch4 Classic.
  • Galaxy Watch5: 40 or 44 mm.
  • Galaxy Watch6: 40 or 44 mm, plus the Watch6 Classic in 43 or 47 mm.
  • Galaxy Watch7: 40 or 44 mm.
  • Galaxy Watch FE: 40 mm.

It does not fit the Galaxy Watch8, the Watch8 Classic or later models, which use Samsung's newer connector. It does not fit the Galaxy Watch Ultra either, which only takes its own bands.

Not sure which watch you have? On the watch, open Settings and tap About watch to see the model name. If the case size isn't clear, measure the case from side to side and pick the closest size in the list.

Pink Gold comes in all 12 fits. Black and Silver cover most of them: neither is made for the Galaxy Watch7 or the 47 mm Watch6 Classic, Black also skips the 44 mm Watch4, and Silver skips the 40 mm Watch4 and the 44 mm Watch5. For other styles and models, browse all our Galaxy Watch bands.

Fitting and wearing it

You don't need tools. Lay the watch face down on a soft cloth. On the old band, slide the small lever on the spring bar toward the middle of the band, lift that end out of the case, and repeat on the other side.

To fit The Halo, hold one end piece in the band slot and set the fixed tip of its spring bar into the hole on one side. Slide the lever, line the other tip up with the opposite hole and let go. Give the band a gentle tug to check that both tips have clicked in, then fit the other end the same way.

To wear it, wrap the mesh around your wrist, draw it to the fit you want and press the clasp down flat, where the magnet holds it. To loosen or tighten it, lift the clasp and set it down a little further along. A good fit keeps the watch sitting still on top of your wrist, with room to slide a finger under the band. If your wrist swells a little on a hot day, lift the clasp and give it some slack. Our fit guide has more help with measuring and sizing.

Care

Steel mesh copes with sweat and rain far better than leather. After a swim, the beach, sunscreen or a long workout, rinse the band under fresh water, pat it dry with a soft cloth and let it dry fully before you wear it again. Dust and lint settle in the weave over time, and a soft toothbrush lifts them out. Keep harsh cleaners and scouring pads away from the colored finishes, Black and Pink Gold above all. How much water your watch can take depends on the watch's own rating, not on the band.

The clasp holds with a magnet, so keep it away from cards with a magnetic stripe. When the band is off your wrist, lay it flat or in a loose curl rather than folding it sharply, which keeps the mesh smooth.

Delivery and returns

Each order is one band, in the color and fit you choose.

Delivery is $6.95, or free on orders over $49. The delivery time for your country shows on each product page and at checkout.

You can return an unworn band in its original packaging within 30 days of delivery. Return shipping is paid by you, unless the item arrived faulty or incorrect. The full terms are on our delivery and returns page.

Questions

Which fit should I order?

Pick your watch model and case size. You'll find the model name on the watch under Settings, About watch. The Watch4, Watch5, Watch6 and Watch7 come in 40 and 44 mm, the Watch6 Classic in 43 and 47 mm. For the Watch4 Classic, The Halo comes in the 42 mm size, and the Watch FE is 40 mm. It isn't made for the Watch5 Pro.

Does it fit the Galaxy Watch8 or the Galaxy Watch Ultra?

No. The Galaxy Watch8, the Watch8 Classic and later models use Samsung's newer connector, and the Galaxy Watch Ultra only takes its own bands. The Halo is made for the Galaxy Watch4 to Watch7 and the FE, which use 20 mm quick-release bands.

These watches all take 20 mm bands, so why pick a model?

The band width is the same, but the case shape changes from one model to the next. The end pieces of The Halo are shaped for each model and case size so the mesh sits close against the case, which is why every fit is made separately.

Do I need tools to fit it?

No. Each end piece has a quick-release spring bar with a small lever. Slide the lever, set the bar into the holes in the band slot and let go. You size the band at the magnetic clasp, so there are no links to take out.

Can it get wet?

The steel mesh doesn't mind water. Rinse it in fresh water after the sea, the pool or sunscreen, then let it dry fully. How much water your watch can take depends on the watch's own rating, not on the band.

Shop by category

Your bag

Favorites